BorgWarner AirWerks S500 SXE 120110 aka S588SX-E - 15009097001 \nUtilizing the latest generation 87.93mm billet EFR compressor wheel aerodynamics with uprated 360 degree thrust assemblies, the all new ‘SX-Enhanced’ turbos redefine performance and value for modern turbochargers. \n \nThis proven design is packaged in a purpose built SX-E compressor housing with ported-shroud inlet and speed sensor port. It is paired with traditional Airwerks 110mm Inconel Turbine and Flexible Housing options.  The brand new 87.93mm S500SX-E Turbocharger from Borg Warner is the 2nd largest T6 turbo in the Airwerks lineup.   Higher airflow rates make this an excellent match for high-boost and high-power 88mm drag racing applications.  Thermals are taken care of by an Oil-Cooled Journal Bearing only. \n \nCompressor Specifications \nCompressor Type: Forged-Milled Wheel (FMW) Extended Tip \nCompressor Wheel OD (Exducer): 120.00mm \nCompressor Wheel Inducer: 87.93mm \nMax Flow Rate: 162 lb/min \nMax Recommended Turbo Shaft Speed: 605 m/s \nCompressor Housing Connections: \nInlet: 6″ Hose Coupler \nOutlet: 3.5″ V-Band or Hose Coupler \n \nTurbine Specifications \nTurbine Type: Inconel S500SX Turbine Wheel \nTurbine Wheel OD: 110mm \nHousing Material: D5S sandcast \n \nHousing Size and A/R ratio: S500SX-E 120110 (S588SX-E) is available in eight (8) different turbine housing configurations: \n0.85 A/R T6 Single Scroll \n1.00 A/R T6 Single Scroll \n1.15 A/R T6 Single Scroll \n1.30 A/R T6 Single Scroll w/ 0.50″ Longer Discharge \n1.15 A/R T6 Twin Scroll \n1.45 A/R T6 Twin Scroll 3.62″ Centerline \n1.45 A/R T6 Twin Scroll 4.25″ Centerline \n1.60 A/R T6 Twin Scroll \nTurbine Outlet: 5.75″ Marmon \n \nBorgWarner SX-E Turbo Features: \nAvailable as a complete turbo -or- Supercore (no turbine housing) to retrofit existing Airwerks installations. \nForged milled compressor wheels with Optimized compressor blade aerodynamics \nAll-new severe duty 360 degree thrust bearing \nCompressor cover integrated speed sensor port and pre-machined boost port \nFlexible compressor cover outlet options: coupler or vband \nInterchangeable with existing Airwerks turbine housings for plug-and-play upgrades